Brand Logo

The TCO Mindset: Why I Stopped Comparing Unit Prices on Office Supplies

I don't care what the unit price says. If you're comparing quotes by the sticker price, you're already losing money.

I've managed procurement for a 200-person company for the past six years. In that time, I've audited roughly $180,000 in cumulative spending, negotiated with more than 30 vendors, and built a TCO spreadsheet that our CFO now uses as a template. And the single biggest lesson I've learned is this: the lowest quoted price is almost never the lowest total cost.

That sounds obvious. It isn't. I still see procurement teams—and I've been guilty of this myself—treating the invoice price as the decision. It's not. It's the first line of a much longer calculation.

The $500 quote that actually cost $780

In Q2 2023, we needed to reprint business cards for our sales team—about 2,500 cards across 40 employees. I got three quotes. Vendor A quoted $620. Vendor B quoted $480. Vendor C, an online printer, quoted $395. I almost went with C.

Then I added up the extras. C charged a $45 setup fee, $60 for shipping, and their office depot business card template compatibility was nonexistent—we would've had to reformat every employee's card manually. That's about 6 hours of my team's time, which at our loaded labor rate works out to roughly $240. Total: $740. Vendor A's $620 quote included template setup, shipping, and a proofing round. Vendor B's $480 quote had a $90 rush fee and a $35 file review charge we didn't initially see. Total: $605.

The "cheapest" quote was 18% more expensive than it looked. The "most expensive" quote was actually the cheapest by $15—and included the least hassle.

That's the moment I stopped comparing unit prices.

Office Depot business accounts are a TCO tool, not just a portal

I get why people treat the office depot business account login as just a purchasing portal. You log in, you order, you're done. But after tracking our orders for two years, I found something counterintuitive: the account itself changed our buying behavior in ways that reduced TCO without us noticing.

First, consolidated invoicing eliminated about $1,200 in annual late-payment fees we were paying across three separate vendor accounts—not because we were late, but because their payment terms didn't align with our AP cycle. When everything runs through one office-depot-business account with negotiated net-30 terms, those misalignments disappear.

Second, the purchase history feature is a quiet cost-control mechanism. Before the account, we'd occasionally double-order supplies because no one had visibility into what another department had already bought. In 2023, we found $2,300 in duplicate orders across six months. Not catastrophic, but not nothing either.

Third—and this is the less obvious one—the account's member pricing doesn't always beat the best online deal on any single item. But it consistently beats the average price we were paying across all items. The average matters more than the outlier. That's a TCO insight, not a pricing insight.

Your CPM calculator is probably lying to you

I use a CPM calculator for print jobs—cost per thousand, the standard metric for comparing print runs. It's a useful tool. It's also a trap if you're not careful.

Here's the issue: most CPM calculators only take the base print price and divide by quantity. That's not CPM. That's “base print cost per thousand.” Real CPM includes setup, shipping, proofing, file prep, and expected reprint rate.

Standard commercial offset printing requires 300 DPI at final size. If your file doesn't meet that, you're either reprinting or accepting a quality drop—both of which are TCO costs your CPM calculator won't catch.

Last year, we ran a 10,000-unit brochure order. Quote A's CPM was $42. Quote B's was $48. On paper, A was 12.5% cheaper. But A's files needed prepress correction (their template didn't match our brand guidelines), and their shipping was DDP—meaning we'd eat customs clearance if the shipment got flagged. B included prepress review and DDP shipping in the quote.

We went with B. Total cost was $71 more than A's quoted total. But we saved an estimated $180 in internal prepress time and avoided the low-probability, high-cost customs delay. B's real CPM was lower.

"But we're too small for a business account"

I hear this a lot from smaller teams. And to be fair, if you're printing 100 business cards once a year, a business account probably isn't worth the setup time. The transaction cost of vendor evaluation exceeds the savings.

But if you have recurring office supply needs—even modest ones—the math shifts. Our break-even analysis showed that at roughly $2,400 in annual office supply spending, the account pays for itself in consolidated invoicing and duplicate-order prevention alone. Below that, it's a judgment call.

The same TCO logic applies outside office supplies. When our design team asked about buying a 3D printer for prototyping, I ran the resin printer vs filament comparison through the same framework. Resin printers had a lower entry price but higher per-part cost and more post-processing labor. Filament printers required more maintenance but had cheaper consumables and less waste. For our use case—roughly 15 prototype parts per month—filament won on TCO despite losing on unit price. (That said, if you're doing high-detail miniatures, resin's quality advantage probably justifies the TCO gap. It's not a universal answer.)

I even applied this to a client gift request last quarter. Someone asked me to source Rare Beauty highlighter as a premium gift for a dozen client contacts. The unit price was higher than the alternative we'd previously used, but the return rate on the alternative was 30% (wrong shade, damaged packaging). Rare Beauty's return rate was under 5%. After factoring in return processing and replacement shipping, the "premium" option was actually 8% cheaper per successful gift delivered. That's not a typical procurement category, but the principle held.

What I'm not saying

I'm not saying unit price doesn't matter. It matters. It's just not the only thing that matters, and in my experience it's rarely the deciding factor once you account for the full picture.

I'm also not saying every purchase needs a TCO spreadsheet. That would be its own form of waste. For low-value, low-risk purchases, the unit price is fine. The TCO framework earns its keep on recurring expenses and anything with a meaningful failure cost.

What I am saying is this: if your procurement decisions start and end with the quoted price, you're probably leaving money on the table—and you won't find it in the invoice. You'll find it in the setup fees, the shipping surcharges, the rework hours, the duplicate orders, and the quiet inefficiencies that never show up on a price tag.

Start with the total. Then work backward. That's the only comparison that actually means anything.

Need help applying this guidance?

Send your printer list, current label SKUs, and the workflow you are trying to improve. Dymo Labels can help translate the article into a practical supply plan.

Ask an Applications Specialist